日本h动漫

<form id=JlOQEFPnY><nobr id=JlOQEFPnY></nobr></form>

<address id=JlOQEFPnY><nobr id=JlOQEFPnY><nobr id=JlOQEFPnY></nobr></nobr></address>

熱門關鍵詞： 2024 2025 2026 請輸入關鍵詞 1 è?·è????????é?? 微小孔高速自動鑽孔機

當前位置: 主頁 > 産品展示 > 數控鑽孔機

平面數控鑽孔機

小孔数控攻牙机是针对于金属攻丝为主的机械设备，最大孔径16mm，一些金属板面需要多孔攻牙的可选着这款设备，工作效率提高不少。 2030D是一款中型高速钻孔，它的有效行程是：主轴

小孔数控攻牙机是针对于金属攻丝为主的机械设备，最大孔径16mm，一些金属板面需要多孔攻牙的可选着这款设备，工作效率提高不少。

2030D是一款中型高速鑽孔，它的有效行程是：主軸左右移動2000mm，主軸前後移動300mm,主軸上下移動200mm，工作台尺寸是2000mm長，280mm寬，如有了解此款産品請認真閱讀下方參數

項目/型號	DNC-2030D	單位
機床外形尺寸（長X寬X高）	X3100,Y1000,Z1400	mm
X軸行程（主軸左右移動）	2000	mm
Y軸行程（主軸前後移動）	300	mm
Z軸行程（主軸上下移動）	200	mm
主軸端面至工作台面距離	120	mm
工作台尺寸（長X寬）	X2000，Y280	mm
最大承重	1200	kg
T形槽尺寸	上寬13，下寬20	mm
鑽孔直徑範圍：	0.3-16（可訂制）	mm
主軸轉速	0-24000（可選配）	rpm/min
滾珠絲杆（X/Y/Z)	Xφ3210,Yφ2010,Zφ16*05（台灣原裝進口）	mm
線性導軌	X,Y,Z:20*2（台灣進口）	mm
主軸電機	0.55/0.75/2.2	kw
XYZ軸快速進給	30000/30000/15000	mm/min
定位精度	≤0.02/1000	mm
重複定位精度	≤0.02	mm
系統分辯率	0.001	mm
系統程序存儲量	約10000	個
機床重量	約1500	kg
編程方式	手動編程，電腦編程兼用
編程傳輸方式	USB
切削冷卻	喷水式切削冷卻系统
系統外接信號控制	支持
外接移動控制	手輪控制
信號燈提示	三色加蜂鳴LED信號燈

相關産品

: 12米長有效行程四軸數控雙頭圓管鑽孔機

: 小型龍門數控鑽攻機

: 視覺定位自動鑽孔機

相關資訊

産品分類

自動鑽孔機

數控鑽孔機

圓管類鑽床

高速鑽孔機

小型鑽孔機

PVC管鑽孔機

金屬鑽攻機

多軸鑽攻機

熱熔鑽攻機

數控攻絲機

高速鑽攻一體機

平面數控鑽床

非標定制鑽攻機

推薦産品

: 12米長有效行程四軸數控雙頭圓管鑽孔機

: 小型龍門數控鑽攻機

: 視覺定位自動鑽孔機

聯系我們

多米（廣東）智能裝備有限公司

电话: 0769-81875401

傳真：0769-81875401

聯系人：黃先生

手機：13240664623

地址：廣東省東莞市長安鎮

上沙創盛路8號

?

在線客服

掃碼與我交流

"And she--ah, yes. I see; and I see, too, that in all she ever said or did or seemed, before, she never made herself such a treasure to be longed for and fought and lived for as in the way in which she--" He paused. But Bruce knew nothing of this change of things. He was utterly puzzled. As he walked home he could make nothing of it. Hetty's story was too circumstantial to be anything but absolutely true. There must have been some strong reason for this change of part. Perhaps Lawrence could throw some light on it. He might even know the man Maitrank. At any rate he was on very friendly terms with Isaac Isidore, who would be sure to have the names of all the European capitalists at his fingers' ends. Lawrence read over the letters carefully, there was less here than he expected. They were all full of vague schemes of making money by various shady ways, and all bewailed the fact that the writer could not obtain the necessary capital to start. Really the letters were hardly worth reading. For loading and unloading carts and waggons, the convenience of the old outside sling is well known; it is also a well-attested fact that accidents rarely happen with sling hoists, although they appear to be less safe than running platforms or lifts. As a general rule, the most dangerous machinery for handling or raising material is that which pretends to dispense with the care and vigilance of attendants, and the safest machinery that which enforces such attention. The condition which leads to danger in hoisting machinery is, that the power employed is opposed to the force of gravity, and as the force of gravity is acting continually, it is always ready to take advantage of the least cessation in the opposing force employed, and thus drag away the weight for which the two forces are contending; as a weight when under the influence of gravity is moved [65] at an accelerated velocity, if gravity becomes the master, the result is generally a serious accident. Lifting may be considered a case wherein the contrivances of man are brought to bear in overcoming or opposing a natural force; the imperfect force of the machinery is liable to accident or interruption, but gravity never fails to act. Acting on every piece of matter in proportion to its weight must be some force opposing and equal to that of gravity; for example, a piece of iron lying on a bench is opposed by the bench and held in resistance to gravity, and to move this piece of iron we have to substitute some opposing force, like that of the hands or lifting mechanism, to overcome gravity. that I have partially discharged that debt--besides, I suppose I could After bathing, during their long prayers to the gods of the river, almost as sacred here as it is at Benares, the pilgrims threw grain to the half-tame fish. Steering vigorously with their tails, the creatures turned and rolled, making eddies of light in the water, and hurrying up to the falling grain occasionally upset the equilibrium of some old woman still taking her bath. At the top of the bank, in the blazing sunshine, two fakirs, squatting in the dusty road, remained unmoved by all this turmoil, seeing nothing, hearing nothing, absorbed in a fixed thought which concentrated their gaze[Pg 297] on an invisible point. The fall of an old woman into the Ganges, with all the shouting that such an incident entails in India, left them quite indifferent; they did not stir, did not even glance at the river as the woman was taken out unconscious. The members all looked up in astonishment. "So I understand," Dr. Haenlingen said. "And you talked. And—whatever his situation—you managed to increase his tension rather than understand or lessen it." "But I d?an't want you to waste your money."

ENTER NUMBET 0011